Aluma EasyLite Truss
Aluma EasySet™ Panel
Standard width panels placed side by side, fixed together with Pin and Wedge and in combination. The unique extruded panels and interlocking system minimizes the amount of welding. Other systems are subject to aluminum welding ruptures, which are difficult and costly to repair.
The Panel’s unique non-welding horizontal stiffener provides structural strength and practicality as panels can be easily maneuvered.
Aluma EasySet™ Stripping Panel & Inside Corner
The Aluma EasySet™ Stripping Panel & Inside Corner incorporate side rails with an angle different then 90 ° with respect to the contact face. With this feature the system achieves integrated stripping panels which dramatically increase the speed of the panel removal/striking of the form -a unique feature only available with Aluma Easylite Truss.
Aluma Easylite Truss Connector
Connects the Aluma EasySet™ panel with the Alumalite Truss. Allows the Aluma EasySet™ panel to be use in combination with Alumalite Truss in one cycle, which consequently allows large section of the slab form to be cycle from floor to floor without dismantling.
Outer Legs & Extension Staff
The Alumalite® truss is composed of 1.219m (4’) modules and can be connected to other trusses, truss connectors, or square ends to increase truss length. Standard sizes are available in 7.32m (24’), 4.88m (16’), 3.66m (12’), 2.44m (8’) & 1.22m (4’) in either standard conﬁgurations or as modiﬁed conﬁgurations.
The Alumalite® truss features the patented double hollow extruded legs which allows the use of extension staﬀ at the top and bottom of the table forms.
Outer Legs & Extension Staffs
With the revolutionary low cost design of the Alumalite® double hollow legs, extension staffs can be inserted into the top and bottom of the table.
Full retractability of either staff provide both high ceiling reach and compact flying through restricted openings, making the Alumalite® truss the most versatile truss system available.